wordpress support forum

14 ft 4″ square steel light pole for parking lot and security lighting

SSS – 4 Bolt Base
CLS-SSS14B4-4-** Black/White/Gray/Green
Mounting height: 14 ft.
Wall thickness: 11 gauge
Butt diameter: 4 in.
Top diameter: 4 in.
Base diameter: 9 in.
Bolt circle: 8-9 in.
Bolt projection: 2.75 in.
Bolt size: .75 x 17 x 3 in.
Net weight: 101 lbs.
Luminary weight: 200 lbs.
Arm style: Specify drilling or tenon size.
Square Straight Steel

Accessories

* CALL FOR GFCI, Vibration Damper and extra hand holes.*

Wind Load Capacity

21 EPA @ 70 mph
18 EPA @ 80 mph
16 EPA @ 90 mph
13 EPA @ 100 mph
10 EPA @ 110 mph
8 EPA @ 120 mph

Reviews

There are no reviews yet.

Be the first to review “14′ 4X4 11 Gauge (Free Shipping)”

Your email address will not be published. Required fields are marked

Light pole material All material shall be weldable-grade, hot rolled, commercial quality carbon steel tubing. Base plate and hand hole material shall conform to ASTM A36. All welds shall conform to AWS D1.1 using E70xx electrodes. EPA Calculations Based on AASHTO Standard Specifications for structural supports for highway signs,luminaires and traffic signals, 1994 edition using and EPSA weight of 25 lbs-per square ft of EPA Height coefficients based on formula (H/30^(1/7). EPA's are calculated at the top of shaft. All welds shall conform to AWS D1.1 using E70xx electrodes. Anchor Bolts Per AASHTO M314-9 Grade 55' withe galvanized steel hex nuts,lock washers and flat washers Hand hole and electrical cover 2 piece Galvanized steel base cover Steel reinforced hand hole cover with gasket Pole finish Bronze powder coated over hot dipped galvanized steel Luminaire mounting Tenon top with 4" x 2-3/8 tenon Drill style with 1-2-3-4 side drilling available Pole Shipping Free pole shipping will apply only to commercial locations with docks and or forklifts