SSS – 35 ft 5×5 7 gauge steel light pole with 4 Bolt Base for parking lot lighting
CLS-SSS35D5-7** Bronze/Black/White/Gray

Light Pole Specs

Mounting height:35 ft.
Wall thickness: 7 gauge
Butt diameter: 5 in.
Top diameter: 5 in.
Base diameter 11 in.
Bolt circle:10-12 in.
Bolt projection:3.3 in.
Bolt size: .1 x 36 x 4 in.
Net weight:433 lbs.
Luminary weight: 50 lbs.
Arm style: Specify drilling or tenon size.
Square Straight Steel Light Pole

Accessories

* CALL FOR GFCI, Vibration Damper and extra hand holes.*

Wind Load Capacity

10.7 EPA @ 70 mph
6.5 EPA @ 80 mph
3.5 EPA @ 90 mph
1.1 EPA @ 100 mph
0.9 EPA @ 110 mph
—- EPA @ 120 mph

Reviews

There are no reviews yet.

Be the first to review “35′ 5X5 7 Gauge (Free Shipping)”

Your email address will not be published. Required fields are marked

Light pole material All material shall be weldable-grade, hot rolled, commercial quality carbon steel tubing. Base plate and hand hole material shall conform to ASTM A36. All welds shall conform to AWS D1.1 using E70xx electrodes. EPA Calculations Based on AASHTO Standard Specifications for structural supports for highway signs,luminaires and traffic signals, 1994 edition using and EPSA weight of 25 lbs-per square ft of EPA Height coefficients based on formula (H/30^(1/7). EPA's are calculated at the top of shaft. All welds shall conform to AWS D1.1 using E70xx electrodes. Anchor Bolts Per AASHTO M314-9 Grade 55' withe galvanized steel hex nuts,lock washers and flat washers Hand hole and electrical cover 2 piece Galvanized steel base cover Steel reinforced hand hole cover with gasket Pole finish Bronze powder coated over hot dipped galvanized steel Luminaire mounting Tenon top with 4" x 2-3/8 tenon Drill style with 1-2-3-4 side drilling available Pole Shipping Free pole shipping will apply only to commercial locations with docks and or forklifts